Zacuto Z Finder Pro 3x DSLR Optical Viewfinder FULL KIT for 3" screens

Description

This is a complete Zacuto Z Finder Pro 3x DSLR Optical Viewfinder kit for 3" screens (
Z-FIND-PRO3).
All original components of the kit are included, along with the original packaging and manuals, as pictured:
3 Extender Frames
Gorilla Plate with DSLR Short Body Frame
Lanyard
Lens Cap & Protective Boot
Anti-Fog Coating Lens
Also included are two Zacuto Z-bands to help secure the loupe to your camera body (highly recommended!).
Here is Filmtools' description of the product:
The Z-Finder Pro 3x is another one of Zacuto's Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 3x focusable magnification, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3" LCD screens. The diopter allows you to dial in the focus to match your eye perfectly. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extends the Z-Finder glass further away from the LCD screen for people who are farsighted. The Z-Finder Pro ships with an anti-fog coating protective cover over the lens. These covers are expendable as users may lose, scratch or damage these covers over time. See below to purchase additional anti-fog protective covers.
The Z-Finder Pro uses Zacuto's Gorilla Baseplate and Z-Finder mounting frame to mount to the camera. The Gorilla Baseplate attaches to the bottom of your camera using a ﾼ 20" screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure. This method allows you to quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release it. With the Z-Finder Pro, you are also a step closer to using one of Zacuto's Gorilla Support Rigs, as they use the same baseplate as the base.